Cleaning and maintenance of shower room
After enjoying the pleasant shower, pay attention to the daily cleaning and maintenance, so that the whole shower room has a longer service life. Cleaning and maintenance of shower room mainly includes four aspects: maintenance of tempered glass, maintenance of aluminum alloy frame, maintenance of hardware accessories and maintenance of bathtub.
I. maintenance of tempered glass
Do not hit or impact the glass surface with sharp objects to avoid damage; do not wipe the glass surface with Tianna water corrosive liquid; do not wipe the glass surface with rough materials to avoid scratches.
II. Maintenance of aluminum alloy frame
First, it is necessary to prevent direct sunlight and exposure to the sun, otherwise it will cause discoloration of the spray layer; secondly, it is not allowed to wipe with corrosive liquid or materials; thirdly, it is not allowed to wipe the surface with rough materials (including toothpaste); fourthly, it is not allowed to carve the surface with sharp objects. If there is stain on the surface of aluminum material, clean it with neutral washing water and wipe it.
III. maintenance of hardware accessories
At present, there are two ways of sliding block and sliding wheel for push-pull shower door. During the use of pulley and slide block, it is necessary to avoid the following force hitting the movable door, so as to avoid falling off of the movable door; pay attention to regularly clean the slide rail, pulley and slide block, and add lubricant (lubricating oil or wax); regularly adjust the adjusting screw of the slide block to ensure the effective bearing and good sliding of the slide block on the movable door.
IV. maintenance of bathtub and chassis
Do not hit or impact the acrylic surface with sharp objects to avoid damage; do not wipe the acrylic surface with Tianna water corrosive liquid to avoid damaging the surface luster; do not wipe the acrylic surface with rough materials to avoid scratches.
I. maintenance of tempered glass
Do not hit or impact the glass surface with sharp objects to avoid damage; do not wipe the glass surface with Tianna water corrosive liquid; do not wipe the glass surface with rough materials to avoid scratches.
II. Maintenance of aluminum alloy frame
First, it is necessary to prevent direct sunlight and exposure to the sun, otherwise it will cause discoloration of the spray layer; secondly, it is not allowed to wipe with corrosive liquid or materials; thirdly, it is not allowed to wipe the surface with rough materials (including toothpaste); fourthly, it is not allowed to carve the surface with sharp objects. If there is stain on the surface of aluminum material, clean it with neutral washing water and wipe it.
III. maintenance of hardware accessories
At present, there are two ways of sliding block and sliding wheel for push-pull shower door. During the use of pulley and slide block, it is necessary to avoid the following force hitting the movable door, so as to avoid falling off of the movable door; pay attention to regularly clean the slide rail, pulley and slide block, and add lubricant (lubricating oil or wax); regularly adjust the adjusting screw of the slide block to ensure the effective bearing and good sliding of the slide block on the movable door.
IV. maintenance of bathtub and chassis
Do not hit or impact the acrylic surface with sharp objects to avoid damage; do not wipe the acrylic surface with Tianna water corrosive liquid to avoid damaging the surface luster; do not wipe the acrylic surface with rough materials to avoid scratches.
